Saab 9-5

Since 1997 of release

Repair and car operation

Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information, recommendations and security measures
   - Forward suspension bracket
      Removal, dismantling, assemblage and installation of a nave and rotary fist
      Removal, dismantling assemblage and installation of a rack of a suspension bracket
      Replacement of a stretcher of petrol models
      Replacement of a stretcher of diesel models
      Removal and installation of the stabilizer of a suspension bracket
   + Back suspension bracket
   + Steering
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment

Replacement of a stretcher of petrol models


    Uncover the inlet pipeline. On models V6 give nuts from an exhaust pipe flange.
    Turn out bolts of fastening of a back pillow of the engine to a stretcher.
    Disconnect from a stretcher a transmission support. On models V6 establish 2 elevating eyes: one on a back part of a head of cylinders, another – to the place of a bolt on a forward part of a head of cylinders. Establish the lift on wings and will hang out the engine. Separate sockets of electroconducting a ljambda-probe (ов) and remove its collars. Remove forward wheels and the bottom protective casings of an impellent compartment.
    Give fixture маслоохладителя, having left it to hang on hoses. Fasten a plait assemblage of a radiator to its support.
    Remove the amplifier (11) from a back part of a stretcher, at a corresponding complete set remove with catalytic the converter the gauge of temperature and lower forward section of an exhaust pipe (12).
    Turn out two bolts of fastening of the steering mechanism (13).
    Disconnect from a stretcher levers of a suspension bracket (14) and the stabilizer of cross-section stability (15).
    Give nuts of fastening of an air cleaner to a stretcher. Remove from a stretcher a back collar of tube ГУР and an arm. Also liberate tubes К/В from their holders. Prop up a stretcher and turn out the remained bolts of its fastening (the Fixture of components of a forward suspension bracket and a steering see an illustration). Slightly lower a stretcher so to provide access to not removed collars of tubes ГУР.
    Lower a stretcher and remove arms (20) fastenings of assemblage of a radiator and holders (21) tubes К/В.
    Installation is made upside-down. Tighten fixture with demanded efforts.