Saab 9-5

Since 1997 of release

Repair and car operation

Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of tips and protective covers of steering draughts
      Removal and installation of the steering mechanism and steering draughts
      Removal and steering wheel installation
      Removal and installation of assemblage of a steering column
      Removal and pump GUR installation
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment

Removal and pump GUR installation

The description for 4-cylinder models is more low resulted.


    Empty a hydrodrive of the amplifier of a steering as Removal and installation of the steering mechanism and steering draughts is described in Section, and connect a hose to tank GUR. Remove an air line with gauge MAF and a belt of a drive of auxiliary units.
    Remove from pump GUR soaking up tube (10), ослабьте a collar and remove from the pump submitting tube (11).
    Turn out bolts (12) fastenings of pump GUR and remove it.

Do not suppose hit of liquid ГУР on the painted surfaces of a body.

    Installation is made upside-down. Make sure of absence of leaks of liquid ГУР in the field of the pump.