Saab 9-5

Since 1997 of release

Repair and car operation


Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information, recommendations and security measures
   - Forward suspension bracket
      Removal, dismantling, assemblage and installation of a nave and rotary fist
      Removal, dismantling assemblage and installation of a rack of a suspension bracket
      Replacement of a stretcher of petrol models
      Replacement of a stretcher of diesel models
      Removal and installation of the stabilizer of a suspension bracket
   + Back suspension bracket
   + Steering
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment

Removal and installation of the stabilizer of a suspension bracket

 PERFORMANCE ORDER

    Uncover the inlet pipeline and turn out bolts of fastening of a back pillow of the engine to a stretcher (see an illustration). Establish the lift on wings and will hang out the engine for a back elevating eye. Поддомкратьте the car also remove forward wheels.
    Remove the amplifier of a stretcher (5), turn out 2 bolts (7) fastenings of the steering mechanism and average bolts (8) fastenings of a stretcher. Lower a back part of a stretcher.
    Disconnect the stabilizer of a suspension bracket from its racks (9), turn out bolts (10) fixing скоб the stabilizer to a stretcher and take it from under the car through the right wheel arch.
    If necessary replace rubber plugs basic скоб the stabilizer. Plugs establish cuts back, preliminary having greased with their means Molycote 33. Installation is made upside-down. Watch that е any hoses and electroconducting have been clamped.