Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   The general information and security measures
   Prorolling of brake system and replacement of a brake liquid
   Replacement brake колодок
   Removal and installation of brake disks
   Removal and installation of brake supports
   Removal and installation of a pedal of a brake
   Removal and installation of the vacuum pump
   Removal and installation of the tank of a brake liquid and ГТЦ
   Removal and installation of brake lines
   Removal and installation of components of a lay brake and its drive
   Removal and installation of components of auxiliary systems (ABS/TC/ESP)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Brake system

Specifications

Specifications to the Head of Adjustment and car routine maintenance see also.

The general data

Brake system Brake system. With double diagonal division of contours, disk brake mechanisms and one-piston floating суппортами*
Volume and type of a brake liquid Specifications to the Head of Adjustment and car routine maintenance see
Hydraulic block ABS Bosch ABS 5.4 (TC/ABS 5.3), with 8 э/м valves ABS (and 4 э/м valves TCS)
Hydraulic block ESP Bosch ESP with 8 э/м valves ABS and 4 э/м valves ESP
The maximum pressure of the returnable pump of hydraulic block ABS, атм 250
Resistance forward//back wheel gauges, the Ohm 1600 160//1130 115
Quantity of teeths of rotors of wheel gauges 29
Backlash between the forward wheel gauge and its rotor, mm 0.3 1.3
The vacuum pump Magneti Marelli
Maximum разряжение, created by the vacuum pump, атм 0.95
The strengthening developed by pressing a pedal of a brake with effort 300 Н 5:01

* On models till 1999 вып. Motionless two-piston supports were applied

Brake mechanisms of forward wheels

Brake disks The ventilated
Diameter of brake disks, mm 285
Thickness of brake disks, mm
  • New disks
25
  • The minimum admissible
22
The maximum admissible palpation of the established disk, mm 0.08
The maximum admissible difference of thickness of a brake disk, mm 0.015
Thickness of brake overlays, mm
  • The standard
11
  • In need of replacement
5
  • At deterioration indication
3

Brake mechanisms of back wheels and lay brake

Brake disks Not ventilated
Type Disk, ventilated
Diameter of brake disks, mm 278
Thickness of brake disks, mm
  • New disks
10
  • The minimum admissible
8
The maximum admissible palpation of the established disk, mm 0.08
The maximum admissible difference of thickness of a brake disk, mm 0.008
Admissible ovality of the built in drum of a brake disk, mm 0.08
Internal diameter of the built in drum of a brake disk, mm 160
Thickness of brake overlays of a working brake, mm
  • The standard
11
  • In need of replacement
4
Thickness of brake overlays of a lay brake, mm
  • The standard
3
  • In need of replacement
0.5

Efforts of a tightening of carving connections, Nm

Directing fingers of floating supports 28
Wheel bolts 110
Bolts of fastening of brake disks
  • Forward disks
4
  • Back disks
10
Fastening bolts анкерной скобы
  • Forward brakes
    • On 2001 вып.
117
    • Since 2002 вып.
140 then to hold on on a corner 45 hailstones.
  • Back brakes
80
Bolts of fastening of a motionless support to ступичной to assemblage 80
Connections of brake tubes 45
Connections of brake hoses 15
Bolt of the hinge of a steering column 25
The union of greasing of the mechanical vacuum pump 24
Bolts of fastening of the mechanical vacuum pump
  • Petrol engines
24
  • The diesel engine
17
Brake lines to ГТЦ 16
Fixture ГТЦ 25
Tubes to the block of auxiliary systems 16
Arm of a cable of a lay brake 8
Nuts of fastening back ступичной assemblages 50 then to hold on on a corner 30 hailstones.
Fixture of the hydraulic block 20
Bolt of fastening of the holder of tube ГУР 5.4









temir