Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of tips and protective covers of steering draughts
      Removal and installation of the steering mechanism and steering draughts
      Removal and steering wheel installation
      Removal and installation of assemblage of a steering column
      Removal and pump GUR installation
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment


C . Дизайн буклетов посмотреть.


Steering

Removal and installation of tips and protective covers of steering draughts

 PERFORMANCE ORDER

  1. Поддомкратьте the car also remove a wheel.
  1. Give a counternut (3) and a nut (4) fastenings of a tip (6) steering bent for to a rotary fist.
  1. Separate a tip from a rotary fist by means of the special adaptation.
  2. Turn out a tip from steering draught, counting up quantity of turns.
  3. Clear area round a protective cover of steering draught and remove it.
  4. New cover grease with greasing Shell EP B2 and fix new collars.
  5. Installation is made upside-down. Наворачивайте a tip on draught on the quantity of turns defined at its removal.

The right and left tips differ from each other and should be established on the corresponding parties of the car.