Saab 9-5

Since 1997 of release

Repair and car operation

Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of tips and protective covers of steering draughts
      Removal and installation of the steering mechanism and steering draughts
      Removal and steering wheel installation
      Removal and installation of assemblage of a steering column
      Removal and pump GUR installation
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment

Removal and steering wheel installation

PERFORMANCE ORDER

Switch off ignition and establish a steering wheel in position of rectilinear movement.

Turn out 2 screws of fastening of the block of a pillow of safety.

Accurately remove a pillow of safety from a steering wheel and separate sockets of a horn and an audiosystem (4). Separate sockets (5) as well on the back party of a pillow.

Slightly delay a steering wheel so to get access to a socket on a spiral spring and separate it (8) then definitively remove a steering wheel.

подрулевой the

Separate a socket (13) spiral springs (15), turn out 2 screws (14) its fastenings and remove a spring.

Installation is made upside-down. Before installation of a spiral spring make sure that it is fixed in the central position. After installation remove codes of malfunction of system SRS.