Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   The general information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of tips and protective covers of steering draughts
      Removal and installation of the steering mechanism and steering draughts
      Removal and steering wheel installation
      Removal and installation of assemblage of a steering column
      Removal and pump GUR installation
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment





Removal and installation of assemblage of a steering column

The telescopic steering column demands the accurate reference with it, and its dismantling is not admissible.


 PERFORMANCE ORDER

  1. Remove a steering wheel (see Has undressed Removal and steering wheel installation).
  1. Remove the bottom section of the panel of devices from outside the driver and release the lever of fixing of a steering column.
  1. Remove casings of a steering column, подрулевые switches and separate their sockets (see an illustration).
  1. Remove sockets of a spiral spring with directing, separate them (see an illustration), and then remove the directing.
  1. Remove the holder of a spiral spring and подрулевых switches.
  1. Remove from a steering column a knee emphasis (11).
  1. Turn out a bolt (12) fastenings of a steering shaft to the steering mechanism and divide them, having pulled a shaft upwards.
  2. Turn out the bottom bolt (13) fastenings of assemblage of a steering column.
  3. Liberate electroconducting from couplers and collars and take her aside.
  4. Deduce duster through the lever of removal of fixing of a steering column that the lever could be removed together with a column.
  5. Turn out the top bolts (16) fastenings of a steering column and remove it.
  6. Installation is made upside-down. The bottom bolt of fastening at first use only for fixing of a steering column that it was possible to tighten the top bolts.









смотреть порно гифки