Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
The general information
Diagnostics of malfunctions of an onboard electric equipment - the general information
Safety locks - the general information
The relay - the general information and check of serviceability of functioning
Стеклоподъёмники
Podrulevye switches
Combination of devices
Removal and installation of lighting devices and replacement of their lamps
Adjustment of an inclination of headlights
Removal and installation of gauges of adjustment of an inclination of headlights
Removal and horn installation
Screen wipers and стеклоомыватели
Gauges of system of the help at a parking
Removal and installation of an audiosystem and rosin.
Removal and installation of components of system SRS
Removal and installation of blocks of management DICE and TWICE
+ Electric equipment schemes
|
Removal and installation of lighting devices and replacement of their lamps
|
Before replacement of any lamp наливания switch off it. Do not take a lamp barehanded since fingerprints evaporate and besieged on a reflector, leading to its tarnishing. At occurrence of stains on a lamp flask wipe its rags moistened in spirit. For possibility of replacement of the failed lamp it is necessary to have a box with spare lamps in the car. The list of lamps applied on the car накаливания is resulted in Specifications. |
Galogennye headlights and forward indexes of turns
|
For removal of headlights forward indexes of turns should be removed. |
|
Remove lateral section of a decorative lattice of a radiator (model since 2002 вып.) or a radiator lattice entirely (models till 2002 вып.) – see Has undressed Removal and installation of decorative lattices of a radiator. At work carrying out on a car left-hand side uncover the storage battery.
|
Wring out downwards a clamp (3), separate a socket (4) and remove the forward index of turn. If necessary only lamp replacements turn it counter-clockwise and take from the case of the index of turn.
|
Remove a protective cover to facilitate headlight removal.
|
Turn out screws and remove clamps (6).
|
Slightly delay a headlight to reach a socket and separate it (8) then definitively remove a headlight.
|
If necessary only a headlight it is not required to remove replacement of a lamp, – remove from a headlight a cover (1), separate a socket (2) and unhook скобу (3) fastenings of a lamp.
|
|
|
The xenon headlights and their lamps – replacement
|
For work of the xenon headlights the high voltage (23 кВ) is used. |
|
Translate the ignition key in position LOCK and remove a headlight.
|
Release a clamp (3) fastenings of the block (4) lamps and extend the block from a headlight then take from it a lamp (5).
|
|
Turn out screws of fastening of the block of management.
|
|
Raise the block of management and separate its socket.
|
|
|
Repeaters of indexes of turns
|
|
Slightly press forward рассеиватель and release its back edge (1).
|
Replace a lamp. For installation fill at first a first line рассеивателя, and then press on its back edge.
|
|
Antifog headlights
|
|
Give fixture (1), delay a headlight and separate its socket (2).
|
|
If necessary only lamp replacements turn its holder (1) on a corner 45 hailstones. Also take a lamp.
|
|
|
The back combined lanterns of models the Sedan
|
|
Give nuts and uncover in luggage space furnish.
|
|
Remove the holder (2) and if necessary replace a faulty lamp.
|
Give fixture of a lantern (3) and remove it.
|
|
The back combined lanterns of models the Versatile person
|
|
Turn clamps (1) on a quarter of a turn and uncover (2) then turn out bolts (3) fastenings of a lantern.
|
|
Delay a lantern aside and remove it from clamps (4).
|
Separate a socket (5) and definitively remove a lantern. Replacement of lamps is made similarly to replacement of lamps of models the Sedan.
|
Give nuts (4). At work on the right party of the car delay the lock (5) and leave it to hang on a rod. Check up consolidation round the lock cylinder.
|
Separate a socket and remove the combined lantern from a back door.
|
|
Stoplight of top level of models the Sedan
|
|
Uncover (1) in a ceiling covering, turn out screws (2) and separate a socket (3).
|
For replacement of lamps to remove a stoplight it is not required, – the holder of lamps from clamps on its edges is enough to liberate.
|
|
Stoplight of top level of models the Versatile person
|
|
Open a back door, uncover (2), turn out nuts of fastening of a stoplight and separate a socket (3).
|
|
Turn out screws (4) and remove a payment with light-emitting diodes.
|
|
|
Licence plate illumination
|
|
Turn out 2 screws, remove рассеиватель and take a lamp from a cartridge.
|
|
|
Internal lighting devices
For replacement any of lamps of internal illumination it is enough to remove of it рассеиватель which fastens by means of clamps and-or screws. More detailed information is resulted in the instruction applied on the car.
|
|