Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
- Systems of cooling of the engine, heating, ventilation and air conditioning
   - System of cooling of the engine
      The general information and safety measures
      Removal and installation of the water pump
      Removal and thermostat installation
      Removal and installation of assemblage of fans of a radiator
      Fan replacement
      Removal and radiator installation
      Removal and installation маслоохладителя 4-cylinder petrol engines
      Removal and installation of a broad tank
   + Systems of heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of assemblage of fans of a radiator

4-cylinder petrol engines

 PERFORMANCE ORDER

  1. Remove перепускную a tube and the valve (1 on an illustration).
  1. Separate sockets of fans (2 on an illustration).
  2. Loosen the collars of fastening of a ventilating hose of system of cooling (3 on an illustration). On models with АТ also remove the tubes fixed on the case of fans.
  3. Turn out bolts of fastening of assemblage of fans (4), unhook its bottom hooks (5) and raise assemblage of fans.
  1. Take assemblage of fans from an impellent compartment, having pulled for its corner (6 on an illustration).
  1. Installation is made upside-down.

Petrol engines V6

 PERFORMANCE ORDER

  1. Remove the top cover of the engine (1 on an illustration), перепускную a tube and the valve. Disconnect a vacuum hose from перепускного the valve турбокомпрессора (2).
  2. Separate a socket of the gauge of temperature/pressure on a submitting tube (3 on an illustration).
  3. Disconnect submitting tube from the case of a throttle and поддомкратьте the car (4 on an illustration).
  4. Disconnect submitting tube from интеркулера (5 on an illustration) and leave on it a collar.
  1. Поддомкратьте the car also remove submitting tube then remove thermoprotection (7 on an illustration) a forward final collector.
  1. Disconnect a hose of giving of air from valve SAI (8 on an illustration) and disconnect tube SAI (9) from a forward final collector.
  2. Remove gauge MAF and a hose then remove submitting tube турбокомпрессора (10 and 11 on an illustration).
  3. Separate sockets of fans, give fixture and remove assemblage of fans
  4. Installation is made upside-down.

Diesel engines V6

 PERFORMANCE ORDER

  1. Uncover a broad tank and a battery cover.
  2. Поддомкратьте the car also remove the bottom protective casing of the engine then lower cooling liquid.
  3. Disconnect from интеркулера a pressure head tube.
  1. Lower the car on the earth and remove submitting tube between турбокомпрессором and gauge MAF (5 on an illustration). Remove the top cover of the engine (6).
  1. Disconnect a pressure head air hose and a tube from the top section of the inlet pipeline (7 on an illustration).
  2. Remove the top hose of a radiator (8 on an illustration).
  3. Turn out a bolt of fastening directing щупа level of impellent oil to an elevating eye of the engine. Turn out the bottom and top bolts of fastening of an elevating eye and shift it aside.
  4. Separate sockets of fans, give fixture and remove assemblage of fans.
  5. Installation is made upside-down.