Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   The general data and security measures
   Sbrasyvanie pressure in fuel system
   + The power supply system of petrol engines
   + The power supply system of diesel engine V6
   - Systems of release and decrease in toxicity of the fulfilled gases
      The general information
      Removal and installation of components of system of release ОГ
      Removal and installation of ljambda-probes
      Removal and installation of components of system SAI
      Removal and installation of components of system EVAP
      Removal and installation of the valve and system EGR tube
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of ljambda-probes

Engines of 2.0 l

 PERFORMANCE ORDER

  1. Remove the top cover of the engine and separate gauge CKP and ljambda-probe sockets.
  1. Accurately take ljambda-probe electroconducting aside and turn out it.

Do not drop a ljambda-probe.

  1. Installation is made upside-down. Grease its carving of a ljambda-probe with means Molycote 1000. Watch that ljambda-probe electroconducting has not been overwound.

Engines of 2.3 l

 PERFORMANCE ORDER

  1. Remove the top cover of the engine and separate sockets of ljambda-probes.
  1. At removal of a forward ljambda-probe remove перепускную a tube and a thermofilter (3 on an illustration), take aside electroconducting of a ljambda-probe and turn out it from target a pipe турбокомпрессора.
  1. At removal of a forward ljambda-probe liberate ljambda-probe electroconducting, поддомкратьте the car and turn out a ljambda-probe.
  1. Installation is made upside-down. Grease its carving of a ljambda-probe with means Molycote 1000. Watch that ljambda-probe electroconducting has not been overwound.

Petrol engines V6

 PERFORMANCE ORDER

  1. Separate a socket of a ljambda-probe and поддомкратьте the car.
  1. Cut couplers of electroconducting of a ljambda-probe, preliminary having remembered a route of its lining, and remove a ljambda-probe.
  1. Installation is made upside-down. Grease its carving of a ljambda-probe with means Molycote 1000. Watch that ljambda-probe electroconducting has not been overwound.