Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   The general information and security measures
   Prorolling of brake system and replacement of a brake liquid
   Replacement brake колодок
   Removal and installation of brake disks
   Removal and installation of brake supports
   Removal and installation of a pedal of a brake
   Removal and installation of the vacuum pump
   Removal and installation of the tank of a brake liquid and ГТЦ
   Removal and installation of brake lines
   Removal and installation of components of a lay brake and its drive
   Removal and installation of components of auxiliary systems (ABS/TC/ESP)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Хендаи бу Воронеж здесь еще больше.


Removal and installation of brake disks

Replacement of brake disks should be made on both wheels of one axis; to a forage of that, simultaneously with replacement of disks it is necessary to replace and колодки. The description only for one wheel is more low resulted.

Forward brake disks

 PERFORMANCE ORDER

  1. Поддомкратьте the car also remove forward wheels.
  1. Squeeze out the piston of the brake cylinder and turn out fastening bolts анкерной скобы to a rotary fist. Suspend assemblage of the brake mechanism on a rack of a suspension bracket so that not to load a brake hose.
  1. Turn out bolts of fastening of a brake disk and remove it from a nave.
  1. Clear a brake disk and establish it on a nave.

On the surfaces of a disk interfaced to a nave there should not be a rust and задиров. A carving of bolts of fastening of a disk grease with hermetic Loctite 242.

  1. Establish анкерную скобу together with a support, preliminary having greased bolts of its fastening with hermetic Loctite 242.
  2. Establish wheels and lower the car on the earth.
  3. Squeeze out a brake pedal to wring out pistons of brake cylinders both in summary check up and if necessary modify level of a brake liquid.
  4. Be passed on the car and check up serviceability of functioning of brake mechanisms.

Back brake disks

 PERFORMANCE ORDER

  1. Поддомкратьте the car also remove back wheels.

Models with a floating support

 PERFORMANCE ORDER

  1. Squeeze out the piston of the brake cylinder (2) and turn out bolts (3) fastenings анкерной скобы. Suspend assemblage of the brake mechanism on a rack of a suspension bracket so that not to load a brake hose.
  1. Loosen the a drive of a lay brake (4), turn out bolts (5) fastenings of a brake disk and remove it from a nave.
  1. Clear a brake disk and establish it on a nave.

On the surfaces of a disk interfaced to a nave there should not be a rust and задиров. A carving of bolts of fastening of a disk grease with hermetic Loctite 242.

  1. Adjust a lay brake (the Section Check of brake system see).

Models with a motionless support

 PERFORMANCE ORDER

  1. Wring out the external piston of the brake cylinder.
  1. Turn out bolts of fastening of a support, liberate a brake hose from a clamp on the lever of a suspension bracket and suspend a support so that not to load a brake hose.