Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   The general information and security measures
   Prorolling of brake system and replacement of a brake liquid
   Replacement brake колодок
   Removal and installation of brake disks
   Removal and installation of brake supports
   Removal and installation of a pedal of a brake
   Removal and installation of the vacuum pump
   Removal and installation of the tank of a brake liquid and ГТЦ
   Removal and installation of brake lines
   Removal and installation of components of a lay brake and its drive
   Removal and installation of components of auxiliary systems (ABS/TC/ESP)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of brake lines

Vacuum tube with the vacuum amplifier

 PERFORMANCE ORDER

  1. Remove the top cover of the engine.
  1. Remove a hose from a delivery air tube, from the inlet pipeline and from the vacuum block.
  1. Connect a new hose.

Brake hoses

The description of replacement of a brake hose of the left forward wheel is more low resulted. Replacement of other hoses is made similarly.


 PERFORMANCE ORDER

  1. Поддомкратьте the car also remove a corresponding wheel.
  1. Disconnect a hose from a support and from a tube (3). Закупорьте the open end of a brake tube.
  1. Loosen the collars (5) also remove a hose.
  2. Installation is made upside-down. Watch, that the hose did not concern details surrounding it at wheel turn. Besides, the hose should not be overwound.
  3. In conclusion of installation pump over a hydrodrive of brake system.

Brake tubes

 PERFORMANCE ORDER

  1. Clear connections of a replaced tube and give them. Закупорьте open connections that the dirt has not got to them.
  1. Clear a new tube the compressed air and establish it.
  2. Pump over a hydrodrive of brake system.