Since 1997 of release
Repair and car operation
+ Cars Saab 9-5
- Controls and operation receptions
+ Access, protection
+ Elements of systems of safety
- The car equipment, arrangement of devices and controls
Combination of devices
Controls and the salon equipment
+ Devices of maintenance of comfort
+ Receptions of operation and auxiliary systems
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
Controls and the salon equipment
Switches and the controls located on a steering column
Left подрулевой the switch
Left подрулевой the switch is intended for management of indexes of turns, switching of near and far light of headlights, the alarm system by a headlight, and also for management темпостатом.Inclusion of a headlight of headlights
For inclusion of a headlight of headlights pull the lever on itself before the fixed position. Thus will light up К/Л a headlight of headlights. Press the lever from itself for switching back in a mode of a passing light of headlights.
The management description темпостатом is resulted in Razdele Tempostat.
Right подрулевой the switch
Right подрулевой the switch is intended for management of cleaners and washers of the glasses which functioning is possible only at the included ignition.
Positions right подрулевого the switch
Moving the switch lever upwards and downwards, it is possible to choose operating modes of cleaners of a windscreen and to switch off them. Between positions 0 and 2 there is an unstable position in which the screen wiper does a single course. At inclusion of a washer cleaners do from 3 to 5 courses depending on operation time of a washer. If speed of the car less than 20 km/h, cleaners do one more course in 9 seconds.
At the included passing light cleaners of lenses of headlights join at every sixth washing of a windscreen or if has passed more than 2 minutes after last washing. If the passing light is switched off, cleaners of lenses of headlights join only at the first washing of a windscreen.
For a choice of duration of intervals of work of a screen wiper, or the 3-item switch is intended for adjustment of sensitivity of the gauge of a rain (on models with a corresponding complete set) (with a vertical course), located on the lever. In extreme top position of the switch an interval/sensitivity maximum, and in the extremely bottom – minimum.
At a corresponding complete set the gauge of the rain located on a windscreen, about a rear-view mirror, automatically operates windscreen clearing. Depending on a quantity of water or snow on glass, the gauge makes or single inclusion of cleaners, or includes them in a continuous mode. At inclusion of the gauge of a rain (position «1» right подрулевого the switch) cleaners do one control course. After that the gauge compares quantity of water/snow on a windscreen to the initial quantity, defined at a control course. Cleaners do a control course as well at each increase in sensitivity of the gauge. For inclusion of the gauge after ignition deenergizing it is necessary to translate preliminary right подрулевой the switch in neutral position. The rain gauge in addition defines light exposure and according to its size is switched in a night or day operating mode. In night position sensitivity of the gauge automatically raises.
(The Versatile person) is intended model for management of a cleaner and a washer of glass of a door of a back 3-item (positions «ON», «OFF» and «») the switch (with a horizontal course), located on the lever. In position «ON» the cleaner works in an interval mode. In position «» clearing and glass washing is made. After several courses the cleaner stops and passes in an interval operating mode (if it is chosen). Approximately through 15 with the ambassador of deenergizing of a screen wiper it does one more course for removal from glass of the possible rests of a liquid. Between positions «OFF» and «ON» there is an unstable position in which the cleaner does one course. Besides, interval clearing of glass of a door of a back joins by the chosen transfer of a backing and established in position «1», «2» or «3» switch of screen wipers.
The horn switch
The button of inclusion of a horn is built in a steering wheel overlay – press it about a steering wheel rim.
Clamp of an angle of slope of a steering column
The steering column should be adjusted so that the steering wheel was opposite to a thorax of the driver. Position at which the steering wheel is opposite to the person of the driver, is wrong as reduces protective functions of a forward pillow of safety of the driver.
Buttons of management of an audiosystem
Buttons of management are located by an audiosystem on each side from an overlay of a steering wheel and intended for increase of safety of use of an audiosystem at driving.
Arrangement of buttons of management of an audiosystem on a wheel
The button with an inscription «NEXT» at audiosystem work in a radio mode is intended for cyclic switching between the preestablished radio stations (1> 2> …> 6> 1> …). At audiosystem work in a cartridge mode by pressing the given button the direction of scrolling of a film (other party of the cartridge is played) varies. At CD playing by repeated pressing the given button there is a cyclic change of a reproduced disk (1> 2> …> 6> 1> …).
The button with an inscription «SEEK» at audiosystem work in a radio mode is used for automatic/manual search of stations; in a cartridge mode – for fragment/rewind search, and in CD mode – for path/high-speed playback change.
The button with an inscription «SRC» by its repeated pressing cyclically switches audiosystem operating modes (radio> the cartridge> CD> CD-changer> radio> …).
The button with an inscription «VOL» is intended for volume control.
The controls located under a combination of devices
Controls under a combination of devices are located at the left (switches and regulators of external illumination) and on the right (the switch of systems TCS/ESP) from a steering column.
In the block located more close to a door, the rotary switch of external illumination, the switch of back foggy lanterns and a regulator of brightness of illumination of devices is established.
The management block external illumination
In the block of the switches located more close to a steering column there is a switch of antifog headlights and a regulator of an inclination of headlights.
The rotary switch of external illumination has 3 positions designated by corresponding pictogrammes:
Brightness of illumination of devices varies by rotation of a wheel of the regulator located to the left of the switch of a back foggy lantern.
The site of the switch of antifog headlights (at a corresponding complete set) is specified in illustrations.
The switch of antifog headlights
The regulator of an inclination of headlights is established on some models and allows to adjust range of illumination of road at various values of loading of the car. For adjustment of an inclination of headlights it is required to include ignition and to establish a regulator wheel in the position corresponding to loading of the car (Specifications see). Preliminary it is necessary to make the basic adjustment of headlights.
Regulator of an inclination of headlights
The switch of systems ESP/TCS is intended for compulsory switching-off of the given systems (at a corresponding complete set).
The switch of systems ESP/TCS
Controls and the salon equipment on the central console
On the central console of the car there is the greatest number of bodies of its management and the salon equipment.
The alarm system switch
The switch of the alarm system with the built in control lamp works in any position of the lock of ignition. For alarm system inclusion press the switch button; for deenergizing – press the button once again. At the included alarm system synchronously with all indexes of turns blinks К/Л, built in the switch, and at the included ignition – and indicators of indexes of turns in a combination of devices. If the alarm system works for a long time, frequency of a blinking of indexes of turns decreases for the purpose of economy of a charge of the battery.
The alarm system switch
Switches-regulators of heating and ventilation of forward seats
Switches of heating and ventilation of lobbies are intended for inclusion and adjustment of intensity of heating and ventilation of pillows and backs of forward seats. In position «0» heating or ventilation are switched off; at switch moving upwards intensity increases.
Switches of ventilation of forward seats
Switches of heating of forward seats
On some models the heating of back seats included by the button, the central console located on a back wall is in addition established.
The switch of heating of a back seat
Прикуриватели and ashtrays
The switch of ignition and steering wheel blocking
The switch of ignition and the steering wheel blocking, named also the ignition lock, is located in the bottom part of the central console, between seats.
Site of the lock of ignition
The ignition lock has following four positions:
LOCK — the Given position of the switch of ignition is used for blocking of a steering wheel and ignition key extraction. In the given position dimensional fires, warning signals and salon illumination work. For extraction of a key from the ignition lock backing transfer (models with Manual transmission) should be included, and on models with АТ the selector lever should be in position «P».
OFF — In the given position the steering wheel and the lever of a gear change selector AT RKPP/LEVER is unblocked.
ON — Normal position of the ignition key after engine start. Before engine start at key turn in the given position it is necessary to check up short-term operation of the control lamps which have been built in a combination of devices (see Has undressed Keys, replacement of an element of a food of block DU). In the given position of a key all electric equipment of the car works.
ST (START) — It is used for engine start. At ignition key keeping in the given position the starter will scroll the engine. In a starter operating time some electric components will be disconnected, facilitating engine start. After release the key comes back in position «ON».
Чашкодержатели and a ware box in the central console
The ware box located in the console between seats has built in чашкодержатель. For box opening pull forward for the back party of its cover.
Access to a ware box
Additional чашкодержатели are located on a forward and back part of the central console.
Чашкодержатель in a forward part of the central console
Чашкодержатель in a back part of the central console
Controls and the equipment of salon located on a ceiling
Switches of internal illumination
In structure of devices of internal illumination fixtures, illumination of the mirrors which have been built in solar peaks, fixtures in foot wells (in front, fixtures in the doorway), and also the fixture in a luggage space ascend forward and back салонные.
Switches and forward салонный the fixture
Each lamp for reading has own switch.
Back салонный the fixture
The operating mode of internal illumination is established by means of the switch close forward салонным to the fixture, on the right. On the average switch position internal illumination joins:
Illumination dies away later 30 with the ambassador of closing of doors, or at ignition key turn in position «ON». If the door is left opened at the switched off ignition, internal illumination dies away later 20 minutes.
The switch of management of a cover of the top hatch
The switch of management is located by a cover of the top hatch near to forward салонным the fixture, in the centre. The switch description is resulted in Section the Top hatch.
Sun-protection peaks and cosmetic mirrors
Double sun-protection peaks are located over a windscreen, on a ceiling at the left and on the right and are intended for blinding prevention by direct solar beams. Peaks are equipped by cosmetic mirrors (on an inside) with the illumination joining at откидывании mirrors.
Solar peaks and cosmetic mirror
Internal rear-view mirror
Before a trip it is necessary to adjust an internal rear-view mirror, turning it so that in its centre the centre of back glass was visible. Thus the mirror should be in a normal mode.
For switching between night and day modes move the lever located behind a mirror, accordingly to itself or from itself.
Switching of modes of a rear-view mirror
On the models equipped with a rear-view mirror with possibility of automatic blackout, for switching between day and automatic modes the button located on its forward panel serves.
Rear-view mirror with automatic blackout
The mirror with automatic затенением has two gauges of light exposure: one is directed forward, and an arch – back. When the gauge directed forward defines decrease in natural illumination, the night mode (under condition of the included automatic mode) joins. The Same occurs at hit on a mirror of bright light of headlights going behind the car. Inclusion of a night mode occurs gradually. At disappearance of bright light behind, and also at increase in brightness of natural illumination the mirror is automatically switched in a day mode.
At inclusion of transfer of a backing the automatic mode is disconnected, and the mirror works in a day mode. At towage of the high trailer the automatic mode also can be switched off, since the trailer will cover the review of the gauge turned back.
The switches located on doors
In each door there are management switches стеклоподъёмниками (the Section of Glass of doors see). Besides at doors of the driver opening switches лючка a jellied mouth of a fuel tank and a cover of a luggage carrier/door of a back (the Section of the Door and a luggage carrier cover see), and also the management block are located by external mirrors.
The management block external mirrors
In the management block the switch between the left and right mirror, the round switch of adjustment of position of the chosen mirror is available external rear-view mirrors. In addition there is a button of an inclination of the right mirror at movement by a backing. For an inclination of the right mirror choose transfer of a backing and press this button. At deenergizing of transfer of a backing the right mirror automatically comes back in a starting position.
On the models equipped with memory of position of a seat of the driver, position of mirrors it is brought in memory simultaneously with storing of position of a seat.
Heating of external mirrors joins simultaneously with heating of back glass (the Section System of automatic heating and an air conditioning (ACC see)).
It is possible to correct a mirror reflector as well manually, cautiously pressing it in the necessary direction.
External mirrors can be put to a door if it is required to pass or park in a bottleneck.
Besides the ware box located in central, the salon of the car it is equipped by ware boxes, opposite to a seat of the forward passenger, located under handles of doors and in an armrest of a back seat.
Ware box with заслонкой givings of cold air
Ware box in an armrest of a back seat
In addition there are pockets on a forward part of pillows of forward seats, on a back part of backs of forward seats, and also on body racks, for backs of forward seats.
It is possible to submit cold air to the ware box located opposite to a seat of the forward passenger, for example, for cooling of drinks stored in a box – pull заслонку on itself.