Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
- Coupling and power shafts
   The general information
   - Coupling
      Removal, check and installation of assemblage of coupling
      Removal and installation of a pedal of coupling and its arm
      Removal and installation of the main and executive cylinders
      Prorolling of coupling and its executive cylinder
   + Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Coupling

Removal, check and installation of assemblage of coupling

Removal and check

 PERFORMANCE ORDER

    Remove Manual transmission (the Manual box of a gear change see the Head).
    Fix a flywheel by means of the special adaptation (2), turn out bolts (3) fastenings and remove press a disk from a flywheel.
    Examine the surface of a flywheel interfaced to coupling. Presence of a touch of dark blue colour, and also thin not deep scratches are not the reasons for anxiety while in the presence of deep scratches it is necessary to replace a flywheel. Check up press a disk on presence of scratches and other damages. If press not equal, it it is necessary to replace a disk. Strongly worn out press also it is necessary to replace a disk. Rotating press the bearing, check up it on presence of excessive noise, and also on deterioration presence. If necessary replace press the bearing.

Installation

 PERFORMANCE ORDER

    Establish conducted and press disks on a flywheel and slightly fix their bolts.

On diesel engines V6 the convex party should be turned to Manual transmission.

    By means of the special adaptation centre coupling and tighten bolts of its fastening with demanded efforts.

On diesel engines V6 put on a carving of bolts fixing hermetic.

    Remove the adaptation for fixing of a flywheel and establish Manual transmission.