Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ The power supply system and release of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
- The external equipment and кузовные elements
Removal and installation of bumpers
Removal and installation of decorative lattices of a radiator
Removal and installation of spoilers
Removal and installation of a covering and the decorative panel of a cover of a luggage carrier
Removal and installation локеров wheel arches
Removal and installation of forward wings and обтекателя a windscreen
Removal and installation of beams of the top luggage carrier of models the Versatile person
Removal and installation of assemblage of the top hatch and its components
Removal and installation of a cowl and its lock
Removal, installation, dismantling and assemblage of a forward door and its components
Removal, installation, dismantling and assemblage of a back door and its components
Removal, dismantling, assemblage and installation of a door of a back and its components
Removal and installation of a cover of a luggage carrier and its components
The fixed glasses
+ The salon equipment
+ Onboard electric equipment
|
Removal, installation, dismantling and assemblage of a back door and its components
Removal, installation and door adjustment
|
|
Open a forward door to get access to consolidation of a plait of electroconducting in rack B.
|
|
Remove consolidation and separate a socket (2).
|
Open a back door and remove the terminator of its course (4).
At first give a nut (5) bottom loops, and then – top (6). Keep a door at removal of the top nut.
Accurately remove a door from loops.
Installation is made upside-down. After installation adjust position of a door concerning a body.
Adjustment of position of a door in a longitudinal plane of the car is made at slightly turned out bolts of fastening of loops to a body, and adjustment in a cross-section plane – at the weakened nuts.
|
|
Adjustment of position of a back door in a longitudinal plane. |
|
|
Adjustment of position of a back door in a cross-section plane. |
|
|
Glasses
|
|
Remove internal furnish of a door (see Has undressed Removal, installation, dismantling and assemblage of a forward door and its components) and влагозащитный the screen.
At removal of glasses remove their external consolidation.
|
|
Lower glass so that its holder was visible through an aperture at doors. Fix glass on a frame by means of strips of a sticky tape.
|
|
|
Disconnect levers стеклоподъёмника from rollers bottom directing, having taken out clips (5) and having hooked levers a wide screw-driver.
|
|
|
Screw-driver insert between the lever and directing not to bend the lever. |
Remove a sticky tape and lower стеклоподъёмник in the bottom position, holding glass that it followed the lift.
|
|
Remove consolidation (8) and turn out screws (8) directing and nuts (9) fastenings of the fixed window.
|
Push the fixed glass forward and remove it from a door upwards.
Remove lowered glass.
Installation is made upside-down.
|
|
Стеклоподъёмник
|
|
Separate a socket (6) стеклоподъёмника.
|
|
Выпрессуйте the central parts of rivets (7,8) also drill them.
|
Lower стеклоподъёмник and remove it together with the e/motor.
|
|
The e/motor is not separable from стеклоподъёмника. |
Installation is made upside-down.
|
|
The lock
|
|
Remove internal furnish of a door (see Has undressed Removal, installation, dismantling and assemblage of a forward door and its components) and влагозащитный the screen.
|
|
Turn out 3 screws of fastening of the lock.
|
|
|
Disconnect a cable from the internal handle of a door and slightly pull the lock downwards to unhook draught (5).
|
Raise the lock and separate a socket (6). Disconnect cables from the handle and draught from the lock (7).
Installation is made upside-down.
|
|
The handle
|
|
Open a door and remove a strip round a door frame.
Remove internal furnish of a door (see Has undressed Removal, installation, dismantling and assemblage of a forward door and its components) and влагозащитный the screen.
|
|
Give fixture and remove a plate from the back party of the handle.
|
Turn out 3 screws of fastening of the lock.
Slightly pull the lock downwards to unhook draught (5).
Remove the handle from a door.
Installation is made upside-down.
|
|
|
|