Saab 9-5

Since 1997 of release

Repair and car operation


Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   The general data and security measures
   Sbrasyvanie pressure in fuel system
   - The power supply system of petrol engines
      Principle of functioning of a control system of fuel injection
      Removal and installation of a sleeve of an air inlet and the case of the air filter
      Removal and installation of gauges MAF, MAP, IAT and the gauge of temperature/pressure of air of pressurisation
      Removal and installation of a tube of forced air
      Removal and installation of the case of a throttle
      Removal and installation of the control valve of forced air
      Removal and installation перепускного the valve турбокомпрессора
      Removal and installation турбокомпрессора
      Removal and installation интеркулера
      Removal and installation of a pedal of gas, adjustment of a cable of a drive throttle заслонки
      Removal and installation of a fuel tank
      Replacement of the fuel filter
      Removal and installation of assemblage of the fuel pump and the gauge of a stock of fuel
      Removal and installation of a fuel distributive highway and injectors
      Removal and installation of a regulator of pressure of fuel
   + The power supply system of diesel engine V6
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of a pedal of gas, adjustment of a cable of a drive throttle заслонки

Removal and pedal installation

 PERFORMANCE ORDER

    Open a cover of a diagnostic socket (1 on an illustration) and turn out bolts of its fastening (2).
    Turn out bolts and release a clamp of the bottom panel (3).
    Separate a socket of illumination of a threshold (4 on an illustration) and remove the bottom panel.
    Shift back the plug (6 on an illustration) and remove it together with a cable. Turn out nuts and remove a pedal (7). Installation is made upside-down.

Cable adjustment

 PERFORMANCE ORDER

    Uncover the engine and a cable clip.
    Adjust a cable free wheeling, keeping one hand the pedal lever in completely loaded position of a spring, and other hand pulling a cable. Having pulled a cable, establish it in the nearest groove. Establish a clip and an engine cover.