Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   The general data and security measures
   Sbrasyvanie pressure in fuel system
   - The power supply system of petrol engines
      Principle of functioning of a control system of fuel injection
      Removal and installation of a sleeve of an air inlet and the case of the air filter
      Removal and installation of gauges MAF, MAP, IAT and the gauge of temperature/pressure of air of pressurisation
      Removal and installation of a tube of forced air
      Removal and installation of the case of a throttle
      Removal and installation of the control valve of forced air
      Removal and installation перепускного the valve турбокомпрессора
      Removal and installation турбокомпрессора
      Removal and installation интеркулера
      Removal and installation of a pedal of gas, adjustment of a cable of a drive throttle заслонки
      Removal and installation of a fuel tank
      Replacement of the fuel filter
      Removal and installation of assemblage of the fuel pump and the gauge of a stock of fuel
      Removal and installation of a fuel distributive highway and injectors
      Removal and installation of a regulator of pressure of fuel
   + The power supply system of diesel engine V6
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of a regulator of pressure of fuel

 PERFORMANCE ORDER

  1. Dump pressure in the power supply system.
  2. On 4-cylinder engines separate ljambda-probe and gauge CKP sockets. On engines V6 remove the top cover of the engine.
  1. Disconnect from a regulator of pressure of fuel a vacuum hose, turn out a coupling bolt of a collar and open a collar.
  1. Remove a regulator.
  2. Installation is made in return sequence. A sealing ring of a regulator preliminary grease безкислотным with vaseline.