Saab 9-5

Since 1997 of release

Repair and car operation



Saab 9-5
+ Cars Saab 9-5
+ Controls and operation receptions
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- The power supply system and release of the fulfilled gases
   The general data and security measures
   Sbrasyvanie pressure in fuel system
   - The power supply system of petrol engines
      Principle of functioning of a control system of fuel injection
      Removal and installation of a sleeve of an air inlet and the case of the air filter
      Removal and installation of gauges MAF, MAP, IAT and the gauge of temperature/pressure of air of pressurisation
      Removal and installation of a tube of forced air
      Removal and installation of the case of a throttle
      Removal and installation of the control valve of forced air
      Removal and installation перепускного the valve турбокомпрессора
      Removal and installation турбокомпрессора
      Removal and installation интеркулера
      Removal and installation of a pedal of gas, adjustment of a cable of a drive throttle заслонки
      Removal and installation of a fuel tank
      Replacement of the fuel filter
      Removal and installation of assemblage of the fuel pump and the gauge of a stock of fuel
      Removal and installation of a fuel distributive highway and injectors
      Removal and installation of a regulator of pressure of fuel
   + The power supply system of diesel engine V6
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of an electric equipment of the engine
+ Manual box of a gear change
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of a fuel tank

 PERFORMANCE ORDER

  1. Lift a pillow of a back seat and unbend a sexual covering (1 on an illustration).
  1. Uncover (2 on an illustration) the fuel pump and separate the top socket (3).

Do not separate a socket on the pump.

  1. Empty a fuel tank.
  2. Disconnect from the pump fuel hoses, having paid attention to their colour and connection places.

The pressure head hose (white colour) is connected to the union with an inscription PRESSURE on the pump; a hose of black colour – returnable.

  1. Поддомкратьте the car also remove back section of an exhaust pipe.
  1. By means of the special adaptation separate a purge tube.
  1. Turn out a plastic bolt of a tube of a jellied mouth and disconnect from it hoses.
  1. Disconnect both cables of a drive of a lay brake from the lever.
  1. Establish under a fuel tank a jack, turn out forward bolts of fastening of collars of a fuel tank, lower it and deduce from under the car.
  1. Installation is made upside-down. It is recommended to replace rubber hoses between a tube of a jellied mouth and a fuel tank, and also a plastic bolt of fastening of this tube. If necessary replace sealing rings of connections of fuel hoses with the fuel pump.









магазин модный уголок